header-photo

Hall of Fame


My hall is striped! Well... at least with tape. I had a busy Saturday and Mike had a busy Sunday, so we really weren't able to work together on it until Sunday night.

In that time, we managed to stripe tape one wall out of two. And it was actually easier then I imagined - I was thinking plumb lines and levels and drawing lines every which way... but Mike came up with a much easier solution.

Since I wanted my stripes to be tape width, (2") we simply placed three small pieces of tape at the top, middle, and bottom of the wall, lining one edge up with the adjoining wall. Then, we'd unroll a wall-length piece of tape, line up the top with the opposite edge of the guide tape, the middle with the middle, and bottom with the bottom. Then we'd just move the guide tape pieces to the opposite side of the newly stuck tape line to line up the next stripe with.

This method worked perfectly! We were pretty meticulous about lining everything up right and making sure the tape was smooth with no wrinkles to offset us. We were actually pretty surprised when we put the level up to a stripe halfway down the hall and found it to be dead-on straight!

0 comments: