header-photo

Ooops #1,982,345

Everyday this house foils me. Once I complete one task - there they are, 10 others unfinished. I begged and pleaded and Mike finally gave himself to the house last weekend.

Our first task was trimming out the closets for doors. In the laundry/mudroom, we discovered that we hadn't counted on trim when we built the closet door opening. So the finished opening wasn't wide enough for the doors we had originally planned on. Now we have to go with one larger bi-fold and one smaller one instead of two large ones. Ooops #1.

Then we discovered that we had trimmed the inside of the guest room closet before it had been drywalled. So, we had to cut the drywall, get the old trim out of there, and nail on the correct trim boards. Ooops #2.

Next, we headed upstairs and trimmed the two closets there relatively painlessly. However, when we went to put on the one set of closet doors we had, we discovered that they were the short doors and not the tall doors the closet opening had been built for. Ooops #3. And we can't return these doors because they've already been opened and have sat in our garage for 4-6 months. AND and, they won't fit anywhere else either. Ooops #1,982,345. Nothing is ever easy!

We also installed the curtain rods on the second floor. That went well, no oops there, thank goodness. It's finally good to get the curtains I bought 2 months ago up in the bedroom. Privacy sweet privacy, if you know what I mean.

But then it was on to the kitchen and the super-sale cabinet pulls I bought online to replace the ugly knobs that were on all the cabinet doors and drawers earlier. You know, the ones that have also been sitting there a good 2-3 months or more. Well, turns out the supplied hardware is impossible to work with. I can't even tell you why, it would boggle your mind. Imagine screws that you have to cut and there's no template to tell you where to drill the 2nd hole for the pull and you can't screw in the screws all the way because of their weird blank space in the middle of the threads design ahhhhhhhh. We finally had to go to the Depot and buy washers so that the pulls could be installed correctly. I'm not sure if all the headache was worth the money I saved on the pulls themselves. And they're still not done yet. Fatigue set in after we finished the upper cabinets.

0 comments: